Table Des Matières - GEO plast GEObox Speed 12 Manuel

INDEX
1. Important details
2. General
E
3. Room condition/Fire safety
4. Distribution of forces
N
5. Filling of the pelletbox
6. Pelletbox cleaning instruction
G
7. Pelletbox fill level control
L
I
1. IMPORTANT DETAILS
S
1.1. PLUMBER/HEATING INSTALLER
The installer must dimension the layout of the plant in such a way that a flawless operation is guaranteed (e.g. connection according to
H
installation guidelines).
The specifications of the boiler manufacturer must absolutely be observed (e.g. maximum distance from the pelletbox to pellet boiler,
maximum height difference, electrical connections, settings, etc.) Apart from that the specifications of the pellet boiler manufacturer (planning
documentation of the pellet boiler/pellet storage room) must be followed.
Please contact the particular manufacturer of the relevant component, to determine the applicability.
1.2. PLANT OPERATOR
Maintenance work according to maintenance guidelines might be necessary.
1.3. SCOPE OF DELIVERY
- pelletbox
- filling system (depending on the model)
- extraction unit (depending on the model)
Boiler manufacturer:
- pellet boiler with feeding unit and control system
- delivery hose DN50mm (with suction systems)
1.4. MOUNTING
The correspondent mounting instructions are attached to the product or can be required in advance. The correct activiation is carried out through
the pellet boiler control system and has to be examined by the plant operator (advisor) during the start-up.
1.5. INTERFACE
The suction hose connections on the suction lance are the interface between pellet boiler and pelletbox. In case of disturbance the cause of error
must be determined according to the manual and must be forwarded to the responsible company.
1.6. LIMITATION OF WARRANTY
Warranty is only guaranteed for the pre-defined interface. Extended warranty is not possible. Functioning warranty can not be given for single
parts and construction kits. The product durability refers to a one-time annual filling.
1.7. VENTILATION OF INSTALLATION ROOM
A permanent ventilation to outside must be ensured. Stick the attached warning label (sticker A4) on the fire door.
1.8. EXTRACTION UNITS
Without written approval of the pelletbox manufacturer, use of foreign extraction units or other external designs is prohibited.
12