Operating The Unit; Operating The Device - Medisana ProMed BODYbelle S Instructions D'utilisation

O
PERATING THE UNIT
DE
Before you
connect the mains plug (B) to the mains socket.
EN
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
FR
wall socket.

Operating the device

IT
A. Select the desired massage head. Remove the protective
cover cloth (E) by pulling it from the device. Now, remove
ES
the pre-installed massage head (D) by pulling it out off the
NL
massage head retainer (C) . Now insert the desired massage
head (D) on the massage head retainer (C). Finally, put the
RU
protective cover cloth (E) back onto the device.
B. Now insert the power plug (B) into the socket.
PL
C. To turn on the device, turn the on/ off switch (A) to the left
(you must hear a slight click). The controller must be blue now.
SE
D. Controlling the massage intensity
To control the massage intensity, you must turn the knob (A).
FI
switch on the device, you must Guiding to left: Increasing the massage intensity.
Guiding to right: Decreasing the massage intensity.
E. After the treatment switch off the massager, pull out the plug
and let the device cool.