Preparation; Operating The Unit - Medisana MC 810 Mode D'emploi

GB
3 Operating
3.1

Preparation

3.2
Operating the
unit
3.3
Function button
on the control
unit
14
• Place the massage seat
it to this by means of the fasteners on the back.
• Connect the power supply unit cable
remote control .
• Plug the power supply unit
the cigarette lighter.
• Now sit on the seat
The massage seat has four massage zones for specific treatment. These are in
the main areas of tension (shoulders, back, waist and thighs). For each mas-
sage zone, you can select nine different types of massage with three levels of
intensity. You can apply the soothing heat treatment in the waist area sepa-
rately or use it together with the massage function. The built-in timer switches
the appliance off automatically after 15 minutes.
• Function button ON/OFF
Switch on: Press ON/OFF.
Switching off: Press ON/OFF again.
To reset the timer, press ON/OFF.
CAUTION
Make sure that the maximum operating time of 15 minutes is
not exceeded.
• Function button MODE
Press MODE to go to the selection of massage programmes (1 - 9). The indi-
vidual massage programmes vary in the type of massage and can be used in-
dividually or in combination.
Waves: With this massage type the motors are switched in such
a way that a wave-like massage (Rolling) feeling is
generated.
Kneading: This massage type is like a Shiatsu massage.
Tapping: For this type of massage, the motors are switched to
generate a tapping massage.
Pulsate: For this type of massage, the massage motors pulsate in a
certain sequence.
The nine massage programmes also differ in the sequence of motor use (1 - 6)
.
Select one of the following programmes 1 to 9. The background lighting in
the display lights up green. Everytime you press MODE, you go to the next
massage programme.
on a high chair or armchair (Car seat) and attach
or the adaptor cable
into the socket or the adaptor cable
and familiarise yourself with the controls.
(Voltage supply):
(Massage programme):
to the
into