Fujitsu T4310 Guide D'utilisation page 93

Figure 40. Opening Memory Compartment
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR
O
NCE IT IS INSTALLED
CAPACITY
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
.
92 - Memory Upgrade Module
Retaining Clip
Figure 41. Installing a Second Memory Module
T PC.
ABLET