Cub Cadet L20 Notice D'instructions Originale page 21

Display cluster (depending on the model; optional)
Maintenance indicator
Note
means: The total operating hours are
displayed.
– – –
Change the engine oil immediately (see engine
Î
operating manual).
This indicator appears every 50 operating hours for
a period of 2 hours.
– –
The engine oil level is too low.
If the indicator does not go out, switch the engine
Î
off immediately and check the engine oil level (see
operating instructions for the engine). Top up the
oil if required.
This indicator may appear briefly after the engine has
started and then go out again.
Note
This function is only active for engines with
an oil pressure switch.
– –
If you turn the ignition key to position
voltage is displayed briefly and then the total
operating hours.
Charge the battery as quickly as possible.
Î
It may be necessary to have the charging system
Î
checked by a service centre for possible damage.
– –
Perform air filter maintenance immediately (see
Î
engine operating manual).
This indicator appears every 25 operating hours for
a period of 7 minutes.
Changing the oil
Oil level
Battery voltage
, the battery
Air filter mainte-
–
Type 2 Ob in conjunction with the ignition
lock Hb
Note
Depending on the model, the indicator panel
may come with a Bluetooth symbol. You
can therefore have all of the functions listed
below, as well as other ones, displayed on
your smartphone. You only require our Con-
nectTM app (available for the Android and
iOS operating systems). The ConnectTM
app provides you with all the important infor-
mation and notices concerning your device.
For example, you are notified when the time
comes to check the oil, air filter, battery, cut-
ting blade, etc. or have them serviced.
You can find the ConnectTM app at our web-
site www.mtdproducts.eu for
download.
Install the app onto your smartphone and
follow the step-by-step instructions to synch
your device to your phone.
Operating hour counter
When the inserted ignition key is pressed for less
than 1.5 seconds, the battery voltage is briefly
displayed and then changes to the operating hours
indicator. Operating hours are only counted if the
engine is running.
Maintenance indicator
–
Change the engine oil immediately (see engine
Î
operating manual).
This indicator appears every 50 operating hours for
a period of 2 hours.
– –
The engine oil level is too low.
If the indicator does not go out, switch the engine
nance
Î
off immediately and check the engine oil level (see
operating instructions for the engine). Top up the
oil if required.
This indicator may appear briefly after the engine has
started and then go out again.
Note
This function is only active for engines with
an oil pressure switch.
EN
Changing the oil
Oil level
21