Waste Disposal And Environmental Protection; Technical Data - Deltafox DC-HPW 2115 Traduction De La Notice D'utilisation Originale

• Store the pressure washer and its ac-
cessories in a frost-free room.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this.

Technical data

Pressure Washer ............ DC-HPW 2115
Mains connection................230 V~, 50 Hz
Power consumption ...................... 2100 W
Mains cable .........................................5 m
Weight (without accessories) ......... 10,2 kg
Safety class .........................................
Degree of protection .......................... IPX5
Rated/operating pressure (p).........11 MPa
Max. permissible pressure
(p max) ...................................... 15 MPa
Max. inflow pressure (p in max)... 0.8 MPa
Max. inflow temperature (T in max) ...40°C
Pumping rate, water (Q) .............. 5.5 l/min
Max. pumping rate, water
(Q max) .................................... 7.5 l/min
Sound pressure level
(L ) ................. 78.2 dB(A); K
pA
Sound power level (L
measured ....... 91.7 dB(A); K
guaranteed ............................98.0 dB(A)
Vibration
(a ) ..................... 0.496 m/s
h
= 3.0 dB
pA
)
WA
= 3.0 dB
WA
; K=1.5 m/s²
2
Do not exceed the maximum permitted
network impedance of 0.277 Ohms at the
electrical connection point.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
II Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).
GB
25