Switching Off; Switching On; Power Stage; Special Temp-Functions - CASO DESIGN Pro Slide 2100 Mode D'emploi Original

14.4.2

Switching Off

The complete appliance is switched off using the Master On/Standby switch (1).
► Note that the appliance's fan continues to operate for a while after the appliance has
been switched off in order to dissipate the heat that has built up in the appliance.
14.4.3

Switching On

Plug in the device and the display shows "L" or "H"
► "H" means the surface temperature is high,"L" means low.
Press the Master On/Standby switch (1), the LED flash.
Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø 120
mm - 220 mm).
► The temperature of the cooker plate surface displayed
14.4.4

Power Stage

Press the selection key +/- (2) as long as necessary to select the power stage (Indicator
lamp showing correct power stage).
With the + / - Keys (2) or the Slider (6), you can change
the settings at any time in a range from 1 – 12.
14.4.5

Special temp-functions

Fry Function
This function is used to fry steaks and other meat.
Press the button Special function (5) and select the "Fry" function.
The display lights up, with the preset stage 160.
You can change the stage with the + / - Keys (2) or the Slider (6).
Keep Warm Function:
You can use this function to keep food warm.
Press the button Special function (5) and select the "Keep warm" function.
14.4.6

Timer

After selecting the power level, select the timer button (3).
Please note
Please note
45