Coldwash™ Cycles; Cycle Setting Buttons - LG WM3875H Serie Mode D'emploi

COLDWASH™ CYCLES
COLDWASH
the COTTON/NORMAL, PERM.
PRESS, BULKY/LARGE, HEAVY
DUTY, TOWELS, DELICATES, HANDWASH/
WOOL , and SPEED WASH cycles.
Adding the COLDWASH option to these cycles
TM
provides reduce energy usage and same washing
performance as warm wash. By using 6 different
washing motion (Tumbling, Rolling, Stepping,
Scrubbing, Swing, Filtration), fabrics get the
cleaning benefits, without the energy usage.
To Add COLDWASH™ to a Standard Cycle:
Turn on the washer and turn the cycle
1
selector knob to select a cycle with the
COLDWASH™ option.
2
Press the COLDWASH™ button. The washer
will automatically adjust the cycle settings.
3
Set any other desired options.
Press the START/PAUSE button to start the
4
cycle. The washer will start automatically.
IMPORTANT NOTES ABOUT STEAM CYCLES:
• When you select the COLDWASH™ option,
wash time will be increased up to 10 minutes.
• For high wash efficiency, it is recommended to
use less than 8 pounds.

CYCLE SETTING BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press
the button for that option to view and select
other settings.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
cycles include
TM
H O W TO U S E
WASH/RINSE
Selects the wash and rinse temperature
combination for the selected cycle. Press
the WASH/RINSE button repeatedly to
scroll through available settings.
• Your washer features a heating element to boost the
hot water temperature for Extra Hot settings. This
provides improved wash performance at normal water
heater settings.
• Select the water temperature suitable for the type of
load you are washing. Follow the fabric care label for
best results.
• Warm rinses leave the loads drier than cold rinses.
Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
SOIL LEVEL
Adjusts the selected cycle to allow
more time for heavily soiled clothes
or less time for lightly soiled
clothes.
SPIN SPEED
The washer drum spins at up to
1,400 RPM. This reduces drying
time and saves energy.
Press the SPIN SPEED button to select the
maximum spin speed. Some fabrics, such as
delicates, require a slower spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain &
Spin cycle to drain the tub and spin clothes; for
example, if you want to remove clothes before
the cycle has ended.
To activate the DRAIN & SPIN cycle:
Press the ON/OFF button to turn on
1
the washer.
Press the SPIN SPEED button.
2
Select the desired spin speed.
3
NOTE: If NO SPIN is selected, the washer
will drain only.
Press the START/PAUSE button.
4
BEEPER
Adjusts the volume of the end-of-
cycle beeper, or turns it off.
23