Coldwash™ Cycles; Cycle Setting Buttons - LG WM2450H A Série Manuel D'utilisation

COLDWASH™ CYCLES
COLDWASH
TM
the BULKY/LARGE, DELICATES,
PERM.PRESS, COTTON/NORMAL,
HANDWASH/WOOL
WASH cycles.
Adding the COLDWASH
TM
provides reduce energy usage and same washing
performance as warm wash. By using 6 different
washing motion (Tumbling, Rolling, Stepping,
Scrubbing, Swing, Filtration), fabrics get the
cleaning benefits, without the energy usage.
To Add COLDWASH™ to a Standard Cycle:
1
Turn on the washer and turn the cycle
selector knob to select a cycle with the
COLDWASH™ option.
2
Press the COLDWASH™ button. The washer
will automatically adjust the cycle settings.
3
Set any other desired options.
4 Press the START/PAUSE button to start the
cycle. The washer will start automatically.
IMPORTANT NOTES ABOUT COLDWASH™ CYCLES:
• When you select the COLDWASH™ option,
wash time will be increased up to 10 minutes.
• For high wash efficiency, it is recommended to
use less than 8 pounds.

CYCLE SETTING BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons.
Press the button for that setting until the indicator
light for the desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every wash/
temp., spin speed, soil level, or option is available
with every cycle. See the Cycle Guide for details.
cycles include
, and SPEED
option to these cycles
H O W TO U S E
WASH/TEMP.
Selects the wash and rinse temperature
combination for the selected cycle.
Press the WASH/TEMP. button until the
indicator light for the desired setting is
lit.
• Your washer features a heating element to boost the hot
water temperature for Extra Hot settings. This provides
improved wash performance at normal water heater
settings.
• Select the water temperature suitable for the type of
load you are washing. Follow the fabric care label for
best results.
• Cold rinses use less energy, and the rinse temperature
depends on the cold water at the faucet.
• The water temperature of all rinsing cycles are
set as cold.
SPIN SPEED
The washer drum spins at up to
1,200 RPM. This extracts more
water from clothes, reducing
drying time and saving energy.
Press the SPIN SPEED button until the indicator
light for the desired setting is lit. Some fabrics,
such as delicates, require a slower spin speed.
SOIL LEVEL
Adjusts the selected cycle to
allow more time for heavily soiled
clothes or less time for lightly
soiled clothes. Press the SOIL
LEVEL button until the indicator
light for the desired setting is lit.
23