Télécharger Imprimer la page

Installation; Location; Mounting - Navman D100 Manuel D'utilisation

Le sondeur navman affiche normalement la profondeur au-dessous de la sonde.il est possible d'introduire un paramètre positif ou négatif permettant d'afficher la profondeur par rapport à un point donné

Masquer les pouces Voir aussi pour D100:

Mode d'emploi (4 pages)

Les langues disponibles

Installation

Location

The NAVMAN D100 is designed for above or

below deck installation. Select a position that is:

• At least 300mm from a compass

• At least 500mm from any radio

• Easy to read by the helmsman and crew

• Protected from physical damage

• Accessible to electrical cable connections

4.5mm

(1.75")

NAVMAN D100 User Manual

56mm

(2.2")

112mm

(4.4")

Mounting

The mounting surface must be flat. Use the

template to set the centre of the fixing hole.

• Drill a 32mm (1.25") diameter mounting hole

through the bulkhead.

• Remove the fixing nut. Peel the protective

paper off the foam gasket and attach the

gasket to the rear of the instrument.

• Insert the instrument through the bulkhead.

Hand tighten the nut and then finally tighten

with a spanner. Do not over tighten so that

the water sealing ability of the gasket is

damaged.

24mm

(1")

112mm

(4.4")

35mm

(1.4")

30mm

(1.2")

Table des Matières