Behringer EUROPOWER PMP550M Guide Rapide page 6

Masquer les pouces Voir aussi pour EUROPOWER PMP550M:
Table des Matières

Publicité

10
EUROPOWER PMP550M
EUROPOWER PMP550M Controls
(1)
(2)
(3)
(4)
(5)
(6)
(20)
(7)
(8)
(9)
(11)
(10) (12) (13) (14) (15) (16) (17)
(18)
(19)
(21)
11
Quick Start Guide
Step 2: Controls
(1) HIGH and LOW EQ knobs adjust the high
(EN)
and low frequencies of the input source on
the channel.
(2) MIC input connects to low impedance
sources via XLR connector.
(3) GAIN HI / LO button adjusts the channels
input sensitivity.
(4) LINE IN input connects to high impedance
sources via 1/4" connector.
(5) LEVEL knob adjusts the volume level of the
input source on the channel.
(6) FX knob adjusts the amount of effect
applied to the input source on the channel.
(7) MULTI-FX PROGRAM display indicates the
currently selected effect preset.
(8) GRAPHIC EQ adjusts the amount of specific
frequencies at the MAIN output.
(9) MAIN LEVEL METER indicates the volume
level at the MAIN output.
FX on/off button turns the MULIT-FX
(10)
processor on or off.
TAP tempo button adjusts the tempo of
(11)
time-based FX.
FX LEVEL knob adjusts the amount of effect
(12)
applied to the MAIN output.
FX PROGRAM selector knob designates the
(13)
selected FX preset.
AUX IN LEVEL knob adjusts the input level
(14)
of connected auxiliary sources.
AUX IN connects auxiliary input sources via
(15)
1/8" connector.
DIGITAL WIRELESS microphone
(16)
USB input connects to a USB wireless
transmitter dongle (optional) via USB 3.0
type A connector.
FBQ FEEDBACK DETECTION button
(17)
activates the FBQ feedback detection system
at the MAIN output when engaged.
MAIN level knob adjusts the volume level of
(18)
the MAIN output.
ON/OFF button truns the mixer on or off.
(19)
POWER SOURCE connect the included IEC
(20)
cable into this connector.
MAIN outputs connect to passive
(21)
PA speakers via 1/4" connector.

Publicité

Table des Matières
loading

Table des Matières