Communications; Communications Interfaces; Snmpwebcard Slot; Input Dry Contact Interface - Tripp-Lite SmartOnline SU40K Manuel Du Propriétaire

11 – Communications
1
Note: The communications connections described in this section are optional. The UPS system will function properly without these connections.
2

11-1 Communications Interfaces

3
4
5
6
7

11-2 SNMPWEBCARD Slot

Remove the cover panel to install a Tripp Lite SNMPWEBCARD accessory. The SNMPWEBCARD accessory provides an Ethernet interface for
8
the UPS system and enables remote monitoring and control via SNMP, Web browser or telnet. Call (773) 869-1234 for more information about
ordering the SNMPWEBCARD accessory.

11-3 Input Dry Contact Interface

9
The input dry contact interface receives contact-closure signals that allow the UPS system to receive commands and monitor external battery
conditions:
P1—Remote Emergency Power Off (EPO)
P2—Auxiliary Dry Contact Inputs (2 sets)
10
P3—External Battery Cabinet Temperature 1
P4—External Battery Cabinet Temperature 2
P5—External Battery Cabinet Temperature 3
11
P6—External Battery Cabinet Temperature 4
P7—External Battery Status
12
13
14
Parallel
Output Dry
Redundancy Port
Contact Interface
SNMPWEBCARD Slot
RS-232
Serial Port
46
Input Dry Contact
Interface