Ups System Setup Menu; Bypass Setup Menu - Tripp-Lite SmartOnline SU40K Manuel Du Propriétaire

10 – Display and Confi guration
1

10-7 UPS System Setup Menu

• Press the enter button (
1
2
menu.
• Accessing the UPS system setup menu requires a password. From
2
3
the login screen, press the enter button (
to log in as an administrator or a user. Administrators can view
and change all UPS system parameters; regular users can view
all parameters, but can only change a few basic parameters. Only
qualified service personnel should log in as the administrator.
4
5
3
• The password consists of 4 numerals. Press the scroll down button
( ) or the scroll up button ( ) to select the first numeral, then
press the enter button (
entering the last numeral, press the enter button (
the password choice. The default user password is 0000. The
6
default administrator password is 0000. Only qualified service
personnel should have access to the administrator password. See
Section 10-11 for instructions on changing the passwords.
7
• After the correct password has been entered, the LCD screen will
4
show the UPS system setup menu.
8
9

10-8 Bypass Setup Menu

• Enter the UPS system setup menu as described in
1
10
Use the scroll buttons ( , ) to move the cursor to "BYPASS
SETUP", then press the enter button (
11
12
• Use the scroll buttons (
2
"VOLTAGE RANGE" or "FREQUENCY RANGE".
13
14
) to select "UPS SETUP" from the main
) to select whether
) to enter the numeral choice. After
) to confirm
Section
).
, ) and the enter button ( ) to select
(continued)
1
2
3
4
10-7.
1
2
36