Brandson Equipment 303112 Mode D'emploi page 23

10
6 Application
Keep the fan in an appropriate location and connect the device to a properly in-
stalled 220-240V AC socket. In order to activate the device as for speed selection,
use the rotary switch at the rear side: 0 = off, 1 = slow, 2 = medium and 3 = fast. In
order to turn of oscillation, push the stick (7) on the top side. If you do not want
to use the oscillation, pull out the knob to some extent.
Angle of inclination
The angle of inclination can be adjusted by unscrewing the knurled nut (3) and
the small knurled screw (9), wherein the protection cage must be moved or
pressed slightly forward or backwards.
The limiting screw (2) ensures that the angle of inclination is not too big and the
motor unit tilts with the protection cage.
3
Important notice: If the device is to be tilted independently, the screws (3) and (9)
must be tightened securely till the desired support is ensured!
English
Then secure the motor unit with the lock nut (3)
and the carriage bolt (10).
3
9
23