3
Slide the EJECT switch to the
right to open the lid.
If the picture is not visible or difficult
to see
Adjust the angle of the screen.
4
Insert the Picture MD with
the label facing up, and push
it fully by hand.
Then, press the lid down to close.
"PICTURE MD" will appear on the
screen.
EJECT switch
To eject the MD
Slide the EJECT switch to the right to open the
lid, and pull out the MD.
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
z
Cont
5
(EN)