TOOLCRAFT 2309665 Mode D'emploi page 31

The noise level of the appliance may exceed 87 dB(A). Wear suitable ear defenders to prevent hearing
damage.
• The vibration emission value stated in this manual was obtained using a standardized EN 60335-1 test procedure.
The result can be used to compare vibration levels of different electrical tools. It can also be used to obtain a
preliminary estimate of your exposure to vibrations.
• The specified value indicates the vibration level when the tool is used for its intended purpose. The actual vibration
level may differ from the specified value if the tool is used for other purposes, if other tools are used, or if the tool
has not been serviced properly. These factors can considerably increase your exposure.
• For an accurate estimate of your exposure, you must also account for the times when the appliance is switched off
or switched on but not actually in use. These factors can considerably reduce your exposure.
• Take additional safety measures to protect the user against the effects of vibration, e.g.: Maintenance of electric
tool and insertion tools, keeping your hands warm, organisation of work processes.
31