Introduction; Explanation Of Symbols - TOOLCRAFT 2309665 Mode D'emploi

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact: www.conrad.com/contact

2. Explanation of symbols

The symbol with the exclamation
mark in the triangle is used to indicate
important information in these operating
instructions. Always read this information
1
carefully.
The arrow symbol indicates special
information and advice on operation.
Wear protective eyewear with side
shields.
2
Wear hearing protection.
3
Wear suitable respiratory protection.
5
Wear protective gloves.
7
18
Guaranteed sound power level:
87
87 dB.
Keep all other persons away from the
danger zone.
Caution! The cutter blades continue
to run after the motor is switched
off. Wait for the blades to come to a
standstill. Risk of injury!
4
Read the operating instructions com-
pletely before using the product.
6