Tips On Use; Cutting Grass; Troubleshooting - TOOLCRAFT 2309665 Mode D'emploi

b) Tips on use

Cutting grass

1
• Allow the grass cutter to glide above the ground.
• For best results, the grass should be dry.
Trimming hedges
2
The tool can be used to trim small hedges.
• Hold the tool slightly tilted in relation to the hedge you want to cut.
• Start by cutting the sides from the bottom up, then cut across the top.
• For best results, the hedge should be dry.
• Let the cutting head do the work, do not force it.

11. Troubleshooting

Always switch the product off and remove the battery when troubleshooting. Accidentally starting the prod-
uct can cause serious injuries!
Problem
The product does not
switch on
Slow running, noisy,
or hot blades
Possible causes
The battery has depleted
The battery is not inserted correctly
Dry, corroded blades
There is a blockage or wet grass jammed
between the teeth.
Low battery
Blades or blade support bent
Loose blade bolts
Possible solutions
Recharge the battery
Check the battery is inserted properly
Lubricate blades
Remove the blockage
Recharge the battery
Stop using the product.
Tighten blade bolts
27