Setting Up; Insert/Remove Battery Pack; Attaching/Remove Cutting Heads - TOOLCRAFT 2309665 Mode D'emploi

8. Setting up

Warning
• Always leave the blade covers on until you are ready to begin cutting. This protects the user from injury and
the blades from getting damaged.
a) Insert/remove battery pack
• To insert a battery pack, align the tab on the battery with the slot
on the tool.
• Hold the tool and battery pack firmly without touching the power
switch.
• Slide the battery all the way in until it locks into place with a
"click". Make sure it is securely fixed in place before letting go.
• Press the battery release button to release the battery pack.
b) Attaching/remove cutting heads
Always remove the battery before attaching or removing cutting heads. Accidentally starting the product
can cause serious injuries!
Attaching
1
Align the attachment point on the product with the cutting head as shown. The parts should "click" into place.
Removing
2
Press both release tabs before removing.
25