Step 2:
1.
Connect the pedal support (87) to the aluminum sliding rail (82) with screw (38), spring washer
(37) and washer (36).
2.
Insert the long shaft for pedal (88) and short shaft for pedal (92) into the pedal support (87)
separately.
3.
Insert the bush for pedal shaft (93) into the short shaft for pedal (92), then tighten with nut (90),
washer (36) and spring washer (37).
4.
Insert the pedal (89) into the long shaft for pedal (88), then tighten with nut (90), washer (36)
and spring washer (37).