Aligning The System; Warranty And Liability; Maintenance, Care, Storage And Transport - Goobay 51896 BeamerFlex Mode D'emploi

User's Manual
5

aligning the system

Tab. 22: Aligning the System
Fig. 32: Aligning the System
6

Warranty and liability

• T he producer grants a 2 years warranty to a new device.
• As the manufacturer has no influence on installation, warranty only applies
to the product itself.
• If any fault or damage is detected on your device, please contact your dealer
and provide your sales slip or invoice as evidence of the purchase, if
necessary. Your dealer will repair the fault either on site, or send the device
to the manufacturer. You make the work of our technicians considerably
easier, describing possible faults in detail – only then you can be assured
that faults, occurring only rarely, will be found and repaired with certainty!
• The manufacturer is not liable for damages to persons or property caused by
improper installation, operation or maintenance, not described in the manual.
• Do not alter or modify the product or its accessories.
• Any use other than described in this user`s manual is not permitted and
causes loss of warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or
user`s manual.
7

Maintenance, Care, Storage and Transport

• The product must be maintained only by professional workshops.
• Protect the angles from dirt and grease them regularly with light machine oil.
• Use a dry and soft cloth to clean your product. Be careful to avoid scratches.
30
Risk of injury by moving product parts
>> Do not hold limbs between shear parts
during use.
>> Mind the mobility of the product during
use. This may move away from the wall or
towards it and swivel sideways.
Align the beamer or projector as
needed
>> Vertically and / or
>> In rotation axis.