Connecting Mounting Legs With Projector Plate - Goobay 51896 BeamerFlex Mode D'emploi

User's Manual
Fig. 27: Installing the mounting legs CLIP Version 2
4.5

Connecting mounting legs with projector plate

Tab. 20: Connecting mounting legs with projector plate
Allen wrench
4mm
Philips head screwdriver
Fig. 28: Connecting mounting legs with projector plate
28
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
2. Connect the adjustable part
(M-E) to your beamer or
projector by using the screws
(M-B) and the spacers (M-H)
as shown.
3. Make sure using a spacer
(M-H) at the front mounting leg
(D) between mounting leg and
adjustable part (M-E).
1. Align the projector plate (C) so
that the mounting legs (D) can
be optimally mounted in the
slots.
2. Connect the projector plate (C)
with the mounting legs (D) and
t he mounting material (M-C,
M-F and W-C) by tightening
the Allen wrench (M-D) clock-
wise.
M-D