Télécharger Imprimer la page

Battery Replacement Remplacement De La Pile - Fisher-Price GeoTrax V9962 Mode D'emploi

Publicité

Battery Replacement
Remplacement de la pile
"AAA" (LR03)
For best performance, we recommend
replacing the battery that came with
this toy with a new "AAA" (LR03)
alkaline battery.
Loosen the screws in the bottom of the
vehicle to access the battery compartment.
Remove the exhausted battery and
throw it away.
Insert a new "AAA" (LR03)
Hint: We recommend using an alkaline
battery for longer battery life.
Replace the bottom of the vehicle and
tighten the screws. Do not over-tighten.
If this toy begins to operate erratically, you
may need to reset the electronics. Remove
the battery and replace it in the toy.
When sounds from this toy become faint
or stop, it's time for an adult to change
the battery.
1,5V
alkaline battery.
Pour un rendement optimal, il est
conseillé de remplacer la pile fournie
par une pile alcaline AAA (LR03) neuve.
Desserrer les vis situées sous le véhicule
pour accéder au compartiment de la pile.
Retirer la pile usée et la jeter dans un
conteneur réservé à cet usage.
Insérer une pile
Remarque : Il est recommandé d'utiliser une
pile alcaline car elle durera plus longtemps.
Remettre le dessous du véhicule en
place et serrer les vis. Ne pas trop serrer.
Si le jouet ne fonctionne pas
correctement, il peut être nécessaire de
réinitialiser le système électronique. Pour
ce faire, retirer la pile et la remettre dans
le jouet.
Lorsque les sons du jouet faiblissent ou
s'arrêtent, il est temps pour un adulte de
changer la pile.
Protect the environment by not disposing of
this product with household waste
(2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
Protéger l'environnement en ne jetant pas
ce produit avec les ordures ménagères
(2002/96/EC). Consulter la municipalité
pour obtenir des conseils sur le recyclage et
connaître les centres de dépôt de la région
(en Europe seulement).
6
alcaline AAA (LR03) neuve.

Publicité

loading