Basic Troubleshooting; Possible Solutions - Paradigm PREMIUM WIRELESS PW 300 Mode D'emploi

BASIC TROUBLESHOOTING

CAUTION: Warning: Do not open your PW 300.
Under no circumstances should your PW 300
be repaired by anyone other than an authorized
Paradigm Dealer, as this will invalidate the
warranty. Please contact Paradigm Customer
Support for more information.
Problem
I am unable to connect
my PW 300 to my Wi-Fi
network.

Possible Solutions

1. Verify that your Wi-Fi network is functioning.
2. Your router's Wi-Fi signal may be weak or your PW 300 may be out of range of your router's Wi-Fi
network. Move the PW 300 closer to the router.
3. Before connecting to your network, verify that your PW 300's Discovery Mode Wi-Fi Indicator (
is pulsing slowly. This indicates the wireless network is ready to pair. A Solid White Wi-Fi Indicator
( ) indicates the PW 300 is paired to a wireless network. If the Bluetooth indicator ( ) is
illuminated BLUE, this indicates the PW 300 is paired to a Bluetooth device; Try disconnect from
the Bluetooth device.
4. Reboot your PW 300 (see page 6).
5. Reset your PW 300 to factory settings (see page 6).
If a problem occurs, you can try the troubleshooting suggestions
listed below. If one of these doesn't remedy the problem, or
you are not sure how to proceed, please contact the Paradigm
Customer Support team at support@paradigm.com. Alternatively,
visit our website at paradigm.com/support for detailed
troubleshooting solutions.
)
13