Play Music & Connect Multiple Pw Series Products; Anthem Room Correction (Arc ™ ) - Paradigm PREMIUM WIRELESS PW 300 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PLAY MUSIC & CONNECT MULTIPLE PW SERIES PRODUCTS
Once your PW 300 is connected to your home network, you can
start playing music anytime.
1. Activate the DTS Play-Fi App on your mobile device or PC. If
you have setup more than one Paradigm product, select which
one you want to stream music to.
2. Select your music source — personal music library or any
subscription-based music service contained on your mobile
device or PC, Internet Radio, or from select online music
services such as Deezer, Songza, etc. (visit our website at
paradigm.com to view a full list of available music services).
How to Connect Multiple Paradigm Premium Wireless
Series products:
1. To connect additional Paradigm Premium Wireless Series
products to your network, open the DTS Play-Fi App and
select "Setting".
2. Select, "Add Play-Fi Device"
3. Follow the instructions to add each Paradigm Premium
Wireless Series product.
ANTHEM ROOM CORRECTION (ARC
If you wish to use Anthem Room Correction on the PW 300, it
must be connected to a Paradigm PW Soundbar in a wireless
theater application.The PW Soundbar is the main source for
Primary/Secondary Zones:
When using the DTS Play-Fi App on your device, you will notice
when streaming music to your Paradigm Premium Wireless Series
product that there are two groups: Primary and secondary zones.
The DTS Play-Fi module within your Paradigm Premium Wireless
Series product requires that a primary speaker be selected to
create a new listening session or zone. The purpose of this is to
eliminate any echo, found on other ecosystems, and to maximize
synchronization down to 1 millisecond.
We suggest that you select the Paradigm Premium Wireless Series
product with the strongest signal strength as your primary device.
It should be noted that secondary speakers are connected to your
primary speaker, so if you disable your primary speaker for any
reason, your secondary speaker will be temporarily unavailable
until a primary speaker is selected again.
)
audio streaming when paired with the PW 300. The PW 300 will
act strictly as a surround speaker and cannot be used as a single
source for music playback for both DTS Play-Fi & Bluetooth.
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières