Bluetooth (Pairing & Operation); Bluetooth Operation - Paradigm PREMIUM WIRELESS PW 300 Mode D'emploi

BLUETOOTH (PAIRING & OPERATION)
Bluetooth Pairing:
• Make sure your PW 300 is plugged in and powered on.
• The Bluetooth LED should be blinking indicating that the device
is in discovery mode.
• Open Bluetooth settings on the desired device.
• From the list provided select PW 300.
• Once paired the PW 300 will emit a tone verifying that it has
been paired and is ready to be used.
• The LED will cease blinking and will now remain solid blue.
Pairing an additional Bluetooth Device:
If the two devices are in the same home/room the original device must
be disconnected or Bluetooth must be disabled.
• Disable Bluetooth on the originally paired device (or simply
disconnect from the PW 300 from the Bluetooth settings on the
original device).
• The Bluetooth LED will return to its blinking state indicating that
the device is in discovery mode.
• Open Bluetooth settings on the desired device.
• From the list provided select PW 300.
• Once paired the PW 300 will emit a tone verifying that it has been
paired and is ready to be used.
• The LED will cease blinking and will now remain solid blue.
8
Breaking a Bluetooth Pairing:
• Open Bluetooth settings on the desired device.
• From the list provided select PW 300.
• From the device options select Forget this Device — PW 300.
• The LED will now return to its blinking state indicating that the
device is in discovery mode.

Bluetooth Operation:

• Bluetooth LED should be Solid Blue.
• If LED is Solid Green — PW 300 is connected to a Play-Fi device,
disconnect from Play-Fi device prior to using Bluetooth.
• On the desired device open media to be played.
• Select PW 300 from device list (see image below).
• If unit is not on the list — PW 300 is connected to a different device.
• Start music playback.
• Volume adjustments made on device, should be reflected on PW 300.
• Volume adjustments made on
PW 300, should be reflected
on device.