Technical Specifications - Dimensions; Technical Specifications; Dimensions; Controls And Indicators - Nilfisk ECO OIL 13 Manuel D'instructions

Technical specifications - Dimensions

Technical specifications

Parameter Units
Voltage / frequency Volt / Hz
kW
Installed power
HP
Weight kg
Noise level dB(A)
Protection IP
Insulation class
Shaving capacity L
Liquid capacity L
Max vacuum mm H
Max air flow rate L/m'
Emptying pump
L/m'
capacity
[ NOTE ]
■ Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%

Dimensions

Figure 3
Model
A (mm)
B (mm)
C (mm)
01/2015
ECO OIL ECO OIL
13 22
230/50 400/50
1.3 2.2
1.8 3
120 135
70 71
43 55
B F
30 30
180 180
O 3,200 3,300
2
2,675 5,100
80 80
ECO OIL 13 ECO OIL 22
670
1050
1500

Controls and indicators

A - Green suction motor start button.
B - Red suction motor stop button.
C - Emptying pump start switch
D - Main switch

Inspection prior to starting

Prior to starting, check that:
■ All latches are tightly locked.
■ The vacuum hose and tools have been correctly fitted
onto the inlet "F" (fig. 5).
■ Do not use the vacuum cleaner if the filter is faulty.

Starting up

■ Lock the castor brakes before starting the vacuum
cleaner "E" (fig. 6).
■ Push the button "A" - fig. 4.
For three-phase motor only: if the vacuum cleaner has
been working and then stops or if the vacuum cleaner motor
turns in the wrong direction, turn it off, remove the plug from
the power socket and have the power cables inverted by a
specialised electrician.

Stopping - Emergency stopping

Push the button "B" (fig. 4).
-5-
ECO OIL 13/22
Figure 4
GB
C77