Fujitsu Halcyon ACUH18LUAS1 Mode D'emploi page 6

OPERATION
To set the operation mode
● Operation mode setting
● Room temperature setting
Lower Rise
● Fan speed setting
ECONOMY OPERATION
Room temperature sensor selection
● This function is locked at the factory. In order to detect the room temperature correctly, consult author-
ized service personnel when using this function.
Press the ECONOMY button for more than 2 seconds to se-
lect whether the room temperature is detected at the indoor
unit or the remote controller.
When the
temperature is detected at the remote controller.
NOTES
• If this function is locked, the location where the room temperature is detected cannot be changed and the
fl ashes when the ECONOMY button is pushed for 2 seconds or more.
En-5
9374379392-04_OM.indb 5 9374379392-04_OM.indb 5
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ................................................ 64 to 88 °F
COOL/DRY ....................................... 64 to 88 °F
HEAT ................................................ 60 to 88 °F
Press the FAN button to set the fan speed.
AUTO
thermo sensor display appears, the room
COOL DRY FAN
HIGH MED LOW
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 11.
HEAT
QUIET
Indoor unit
mark
9/6/2010 10:36:26 AM 9/6/2010 10:36:26 AM