Wagan Tech Smart AC 150 USB Guide D'utilisation page 6

Smart AC ® 150 USB by Wagan Tech
TROUBLESHOOTING
Problem: AC product does not operate, green light does not light
Probable Cause
AC product connected is rated at more
than 150 watts; overload shutdown
occurs.
High starting surge has caused
overload shutdown even though AC
product connected is rated at less than
450 watts.
Lighter socket or 12 volt outlet may
require ignition to be switched on.
Poor contact with lighter socket or 12
volt outlet.
Battery is discharged.
Fuse blown by heavy load.
Problem: Buzzing sound in audio systems
Inexpensive stereo systems have an inadequate internal power supply filtering
which causes a buzzing sound. A system with a high quality filter is the
only solution.
For additional technical support please e-mail customerservice@wagan.com
5
All manuals and user guides at all-guides.com
Suggested Remedy
Use product with a power rating of less
than 150 watts.
Product exceeds inverter's surge
capability. Use a product with starting
surge power of less than 450 watts.
Turn ignition key to accessory position.
Press inverter firmly into the lighter
socket. Make sure the socket is clean.
Recharge battery.
Replace the fuse by unscrewing the
fitting in the positive connector.
www.wagan.com
®