ARC'TERYX VOLTAIR Mode D'emploi page 21

STEP 6: RESET THE SYSTEM
• Return the trigger handle to its home position. This resets
the system so it can be deployed again.
• Do not turn the battery off until you are in a safe situation.
As long as the battery is on and has sufficient charge, you
will be able to deploy the balloon again.
DURING YOUR TEST DEPLOYMENT MAKE SURE THE
FOLLOWING ITEMS DO OCCUR:
PART
• Battery light should flash green when fully
BATTERY charged, connected to the airbag and
turned on.
• System light should flash green when the
battery is connected and turned on.
SYSTEM
• You should hear a test pulse of the motor
when the battery is initially turned on.
• Balloon should exit compartment quickly
BALLOON
and inflate completely within 5 seconds.
21
LOOK FOR