Momentum M510 & X415 shredding capability
CAN shred the following:
• M510: 10 sheets
X415: 15 sheets
• Stapled paper, 25mm within the corner
• 26/6 and 24/6 or smaller staples
• Small sized paper
Thick paper or card
<200gsm
CANNOT shred the following:
Heavy duty staples. Check
the staple leg length is not
greater than 6mm.
Bulldog clips
Adhesive labels.
Bin full
When the bin is full the shredder will not function and the bin full
symbol will illuminate and flash red.
When this happens you must empty the bin.
Pull out the bin to empty.
Once the bin is empty, push it back in and press the On button to
resume shredding.
WARNING: The shredder bin must be fully pushed
closed for the machine to operate.
• Empty the shredder bin when it is full otherwise the
shredder's performance will be adversely affected.
Operating the shredder with a full shredder bin can
result in paper jamming in the cutters, which will
increase the machine's noise level.
• Do not force down shredder paper in the bin using
your feet.
6
No aerosols
• M510: 10 sheets
X415: 15 sheets
• Paperclipped paper, 25mm within the corner
• Capable of shredding small/medium paperclips
(max. wire thickness = 0.9 mm)
• >80/100gsm paper
Glossy paper or a sheet
covered with print on both
sides.
Large clips. Check the
length of the paperclip is
not longer than 32mm.
Bound documents
Magazines or other
documents bound by
multiple staples or clips.
No oil
Door open
If the door is opened during shredding as a safety precaution the
shredder will instantly stop, and the door open symbol on the
indicator panel will flash red.
To resume shredding, shut the door and press the
WARNING
• The shredder DOOR must be fully pushed closed for the
machine to operate.
Accessories
Only use Rexel accessories:
Oil Sheets (20) - 2101949
Oil Sheets (12) - 2101948
Multiple folded sheets
(A3 sheets folded in half).
Plastic sheets, laminated
documents, plastic
folders.
Credit cards
CDs & DVDs
button.