Accessories - Rexel Momentum X308 Manuel D'instruction

Momentum X308 & X406 shredding capability
CAN shred the following:
• X308: 8 sheets
X406: 6 sheets
• Stapled paper, 25mm within the corner
• 26/6 and 24/6 or smaller staples
• Small sized paper
Thick paper or card
<200gsm
CANNOT shred the following:
Heavy duty staples. Check
the staple leg length is not
greater than 6mm.
Bulldog clips
Adhesive labels.
Bin full
When the bin is full the shredder head will be pushed up off the
bin.
This will stop the shredder from shredding.
Please empty the bin and then position the shredder head back
on top of the bin.
You can now start shredding.
WARNING
The shredder bin must be fully pushed closed for the
machine to operate.
• Empty the shredder bin when it is full otherwise the
shredder's performance will be adversely affected.
Operating the shredder with a full shredder bin can
result in paper jamming in the cutters, which will
increase the machine's noise level.
• Do not force down shredded paper in the bin using
your feet.
6
No aerosols
• X308: 8 sheets
X406: 6 sheets
• Paperclipped paper, 25mm within the corner
• Capable of shredding small/medium paperclips
(max. wire thickness = 0.9 mm)
• >80/100gsm paper
Glossy paper or a sheet
covered with print on both
sides.
Large clips. Check the
length of the paperclip is
not longer than 32mm.
Bound documents
Magazines or other
documents bound by
multiple staples or clips.
No oil
Troubleshooting
If the paper shredder will not start, please check the following:
1. Is the machine plugged in correctly?
2. Is the switch pushed to the
3. Is the machine jammed with paper?
4. Has the motor overheated?

Accessories

Only use Rexel accessories:
Oil Sheets (20) - 2101949
Oil Sheets (12) - 2101948
Multiple folded sheets
(A3 sheets folded in half).
Plastic sheets, laminated
documents, plastic
folders.
Credit cards
CDs & DVDs
position?