Complete Set - THERMEx Trend 4500 Mode D'emploi

Unpacking
Check if the device has been damaged in any way.
Environment
To prevent damage during transport this unit is shipped in sturdy packing. Please
recycle the packaging where possible.
Disposal of the appliance
Old appliances must not be disposed of in your household waste! Please bring old
appliances to the appropriate recycling center nearest to you.
Model Thermex Trend 4500 and 6000 do not have plug and need to be connected
with single 220V supply directly.
If the electrical installation does not meet these requirements then it will need to be
modified. This should be done by a qualitied electrician in accordance with the rele-
vant regulations (IEC, NEC, etc.)
Preparing for installation
The water and electrical supply need to be available at the place where the device
is to be supplied. If the electricity cable is buried in the wall then use the supplied
spacers. If the electrical cable is fixed to the wall then the device can also be fixed
straight to the wall.
Frost
If there is the risk of frost in a room, the device should not be installed in this room.
If despite this advice, the device installed in a room where there is a risk of frost, the
device should be drained of water before the risk arises.
2

COMPLETE SET

Device
User manual
Package
Mounting panel
Screw
Dowel
Gasket
Filter
- 1 pcs
- 1 pcs
- 1 pcs
- 1 pcs
- 2 pcs
- 2 pcs
- 1 pcs
- 1 pcs