Certificates - Siemens simovert masterdrives 6SE70 Serie Instructions De Service

12.98
9

Certificates

Confirmation
This confirms that
Equipment
• Type
• Order No.
is manufactured in conformance with EN 60204 Section 6.2
(corresponds to DIN VDE 0113 Section 6.2).
1) See rating plate for complete type designation, serial number and technical data
This equipment fulfills the protection requirements against electric shock according to
DIN VDE 0106 Part 100 when the following safety rules are observed:
• Service work in operation is only permissible on a unit which is not live.
• The converter must be switched into a no-voltage condition and isolated from the
supply when replacing any part/component.
• All panels and the DC link terminals must be closed during operation.
Thus, this equipment conforms to the appropriate regulations in Germany according
to VBG 4 §2 (2) (VBG is a German regulatory body for safety-related issues).
The local operating regulations (e.g. EN 50110-1, EN 50110-2) must be observed when
operating the equipment.
A&D DS A P1
Mickal
Siemens AG 6SE7087-7NP87-2DD0
SIMOVERT MASTERDRIVES
drive converter
SIMOVERT
MASTERDRIVES
6SE70xx-xxPxx
Operating Instructions
Automation and Drives
Erlangen,15.09.1998
Certificates
1)
9-1