Publicité
Les langues disponibles
Les langues disponibles
Specifications (cont'd)
Fuse replacement
Cleaning and storage
Warning
Metrological
checking
Guarantee
14
• Disconnect the test leads from the instrument and turn off the
power (OFF position).
• Unscrew the 4 screws on back cover and slide the cover.
• Remove the fuse cover and replace the fuse with the new one.
• Replace the cover of the fuse and the back cover and secure by 4
screws.
• Periodically wipe the case with a damp cloth and detergent.
• Do not use abrasive or solvents.
• If the meter is not to be used for periods longer than 60 days,
remove the batteries and store them separately.
To avoid electrical shock or damage to the meter, do not get
water inside the case.
Return your instrument to your distributor for any work to be done within
or outside the guarantee.
This equipment is guaranteed against any material defect or
manufacturing faults, in conformity with the general conditions of sale.
During this period (1 year), the equipment may only be repaired by the
manufacturer. He reserves the right to carry out repair or replacement
of all or part of the equipment.
If the equipment is returned to the manufacturer, forward transport is
at the expense of the customer.
The guarantee does not apply in the event of :
•
unsuitable use of the equipment or by association with
incompatible equipment
•
modification of the equipment without the explicit authorisation
of the manufacturer technical services
•
operation by a person not approved by the manufacturer
•
adaptation to a specific application not provided for in the
equipment definition or in the operating instructions
•
impact, fall or flooding.
English
Megohmmeter
Publicité
