Post Production Workflow; Working With Files From Sd Cards - Blackmagic Design Compact Cameras Manuel D'installation Et D'utilisation

How to Update Your Camera Software on Windows
After downloading the 'Blackmagic Camera Setup' software and unzipping the downloaded file,
you should see a 'Blackmagic Camera Setup' installer window. Double click on the installer icon
and follow the onscreen prompts to complete the installation.
After the installation is complete, click on the Windows 'start' menu, and go to 'all programs'.
Click on the Blackmagic Design folder to open the Blackmagic Camera setup software and
instruction manuals.
How to Update your Camera's Internal Software
After installing the latest Blackmagic Camera setup software on your computer, connect a USB
cable between the computer and your camera. On Blackmagic Pocket Cinema Camera, the
Mini USB 2.0 port is located inside the battery terminal.
Launch 'Blackmagic Camera Setup' and follow the onscreen prompts to update the
camera software.
The Mini-USB 2.0 port can be found behind the battery
terminal door on Blackmagic Pocket Cinema Camera

Post Production Workflow

Working with Files from SD Cards

You can access your ProRes or CinemaDNG files straight from your SD card with any Mac OS X
or Windows computer that features an SD card slot or by using an SD card reader.
1 Remove the SD card from your Blackmagic compact camera and insert it into the SD
card slot of your computer, or SD card reader. The SD card can be accessed the same
way as you would an external hard drive, USB drive or any other media storage device
attached to your computer.
2 Double click on the SD card to open it and you should see a list of QuickTime movie
files or folders which contain your CinemaDNG RAW image files. Depending on the
format you chose to record in, you might have a mixture of files and folders, but they
will all use the same naming convention.
3 Now you can simply drag the files you want from the SD card onto your desktop or
another hard drive, or you can access the files straight from the SD card using your
NLE software.
4 Before you physically remove the SD card from the SD card slot, it's always a good idea
to eject the SD card safely using either Mac OS X or Windows first.
Post Production Workflow 59