Camera Video Output; Blackmagic Camera Setup Software - Blackmagic Design Compact Cameras Manuel D'installation Et D'utilisation

4 Immediately above the timeline, you'll see an options box with 'entire timeline' selected.
This will export the entire timeline, however you can select a range of the timeline if
you want to. Simply choose 'in/out range' and then use the 'i' and 'o' hot key shortcuts
to choose the in and out points in your timeline.
5 Go to the bottom of the 'render settings' and click on the 'add to render queue' button.
Your render settings will be added to the render queue on the right side of the page.
Now all you have to do is click 'start render' and monitor the progress of your render in
the render queue.
When your render is complete you can open the folder location, double click on your
new rendered clip and watch your finished edit.

Camera Video Output

Connecting to Monitors
HDMI monitoring can be helpful when accessing the LCD is impractical, such as when the
camera is secured high on a jib arm, on a crane, or mounted on a vehicle.
Monitoring information is displayed on your HDMI output by adjusting the HDMI overlays
options in the display settings menu. HDMI overlays provide frame guides and information such
as recording details and camera settings. If you simply want to monitor your shots, you can
always turn overlays off for a clean HDMI output.

Blackmagic Camera Setup Software

How to Update Your Camera Software on Mac OS X
After downloading the 'Blackmagic Camera Setup' software, unzip the downloaded file and
double click on the .dmg disk image file. Launch the 'Blackmagic Camera Setup' installer and
follow the onscreen instructions.
Blackmagic Camera Setup Software 58