Electromagnetic Compatibility Emc; Fcc Statement, Applicable In U.s - Leica DIGIMOUSE Manuel De L'utilisateur

Electromagnetic Compatibility
EMC
The term Electromagnetic Compata-
bility is taken to mean the capability of
the product to function smoothly in an
environment where electromagnetic
radiation and electrostatic discharges
are present, and without causing elec-
tromagnetic disturbances to other
equipment.
WARNING:
Electromagnetic radiation can
cause disturbances in other
equipment, in installations, in
medical devices, for example
pacemakers or hearing aids and
in aircraft. It can also affect
humans and animals.
Precautions:
Although the product meets the strict
regulations and standards which are in
force in this respect, Leica Geosystems
cannot completely exclude the possi-
bility that other equipment may be
disturbed or that humans or animals
may be affected.
• Do not operate the product in the
vicinity of filling stations or chemical
installations, or in other areas where
an explosion hazard exists.
• Do not operate the product near to
medical equipment.
• Do not operate the product in
aircraft.
• Do not operate the product for long
periods immediately next to your
body.
Digimouse-1.0.0en
CAUTION:
Disturbances caused by electro-
magnetic radiation can result in
erroneous measurements.
Although the product meets the
strict regulations and standards
which are in force in this respect,
Leica Geosystems cannot
completely exclude the possi-
bility that the product may be
disturbed by very intense elec-
tromagnetic radiation, for
example, near radio transmit-
ters, two-way radios or diesel
generators.
Precautions:
Check the plausibility of results
obtained under these conditions.
FCC Statement, Applicable in
U.S.
WARNING:
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in accord-
ance with the instructions, may cause
harmful interference to radio communi-
cation. However, there is no guarantee
that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television
13
Safety Directions