Safety Directions; Intended Use; Permitted Use; Adverse Use - Leica DIGIMOUSE Manuel De L'utilisateur

4. Safety Directions

The following directions should enable
the person responsible for the product,
and the person who actually uses the
equipment, to anticipate and avoid
operational hazards.
The person responsible for the product
must ensure that all users understand
these directions and adhere to them.

Intended Use

Permitted Use

The product is intended for the
following applications:
• Detection and localisation of under-
ground services (cables, metallic
pipes, and connected equipment).

Adverse Use

• Use of the product without instruc-
tion
• Use outside of the intended limits
• Disabling safety systems
• Removal of hazard notices
• Opening the product using tools
(screwdriver, etc.), unless this is
specifically permitted for certain
functions
• Modification or conversion of the
product
• Use after misappropriation
• Use with accessories from other
manufacturers without the prior
express approval of Leica Geosys-
tems
• Inadequate safeguards at the
surveying site (e.g. when operating
on roads, etc.)
Digimouse-1.0.0en
WARNING:
Adverse use can lead to injury,
malfunction and damage. It is
the task of the person respon-
sible for the equipment to inform
the user about hazards and how
to counteract them. The product
is not to be operated until the
user has been instructed on how
to work with it.

Limits of Use

Environment:
Suitable for use in an atmosphere
appropriate for permanent human habi-
tation: not suitable for use in aggres-
sive or explosive environments.
DANGER:
Local safety authorities and
safety experts must be
contacted before working in
hazardous explosive areas, near
to electrical installations or in
extreme environment conditions
by the person in charge of the
product.
9
Safety Directions