Volpi KVS8000P Manuel De L'utilisateur page 31

• When the guide plate is used for a bottom-up cut, the pushing direction of the chainsaw is towards
the operator.
• Do not overload the tool, selecting a suitable tool for the purpose makes work safer and more
efficient
• Do not use the tool if the switch does not work properly. The tool must be repaired if the switch does
not work properly.
• Disconnect the battery from the tool before making adjustments, repairs and before putting the tool
away. This will reduce the risk of inadvertent tool implementation.
• Keep the tool away from children, do not allow people who are not trained to use the tool to use it
• Perform tool maintenance. Check the tool and moving parts, damaged components can cause
accidents and injuries. Proper maintenance of the tool can reduce the risk of accidents.
• Keep the chain clean and regularly oiled. This makes the tool more controllable and reduces the risk
of tool locking.
• Read the manual before using the tool, select the tool and accessories correctly to avoid accidents.
3.4. Warnings for the use of the battery-powered tools
• Use only the charger specified by the manufacturer. The use of battery chargers can damage the
battery and cause risk of fire and explosion.
• The tool is designed for use with the original battery only. The use of different batteries can damage
the tool and increase the risk of injury.
• The battery should be stored away from metal parts (such as coins, paper clips, nails, screws). A short
circuit can cause a fire.
• The incorrect use can cause leakage from the battery. In case of contact with the liquid, wash
thoroughly with water and consult a doctor. Liquid leaking from the battery can cause injury and burns.
31