Body Components - Pride Mobility Products LIFT CHAIR Serie Manuel Du Propriétaire

BODY COMPONENTS

Lift chairs are equipped with several frame and electrical components. Typically, frame (or body) compo-
nents include a removable back pad*, removable chaise pad*, footrest, leg levelers, a lift mechanism, and
scissor mechanisms. The electrical components include the external transformer, hand control, and bat-
‡
teries (not included). Refer to figure 3.1 and note that the illustrations and options listed may not reflect
the type of lift chair that you own.
HAND CONTROL: Contains the controls
needed to operate the various functions
of the lift chair. Refer to the Hand Control
Quick Reference Guide for more
information on hand control options.
QUICK-RELEASE CONNECTOR:
Enables the user to detach the
hand control from the lift chair.
EXTERNAL TRANSFORMER, POWER
CORD: Connects to a standard electrical
outlet to provide power to the lift chair; may
be equipped with an LED which will show
green to indicate power to the transformer.
Refer to the optional wall mounting diagram.
BATTERIES (NOT INCLUDED):
Provide the power needed to
return the lift chair to an upright
or semi-upright position in the
event of a power failure. Must be
installed in the external transformer
if equipped with battery backup.
Figure 3.1 Lift Chair Main Components
8
I I I . Y O U R L I F T C H A I R
LIFT MECHANISM
(PINCH POINT):
Responds to the hand control
commands to position the
chair in the sit and stand
positions. See pinch point
warning for more information.
SCISSOR MECHANISMS (PINCH POINT):
Extend or retract to take the chair through
the various stages of recline. See pinch
point warning for more information.
FOOTREST EXTENSION:
Provides 3 in. (8 cm) of extension
and folds up neatly when lift chair
is in the seated or lift positions;
specific to the LL575 and optional
on some other models.
LEG LEVELERS (4): Manually
rotate up or down to stabilize
the chair before use.
Lift Chair Series