Power Supply; Camera; Options; Technical Assistance - Guarantee - Extel MEMO 2 JS-V726N2 Guide D'installation Et D'utilisation

b. Power supply
• Adaptor 100-240 V~, 50/60Hz ; 17 V , 1.5A
If the power supply cable has to be cut, ensure that the colour coding
of the wires is maintained when reconnecting.
c. Camera
(PL MEMO 2)
• Reference: 822257
• C-MOS colour video camera: 640 x 480
• Viewing angle: H53° V66°
• Rotating lens
• Sensitivity: 3 Lux
• Operating temperature (approximate): -10°C to +45°C.
• Protection index: IP44
• Measurements with shield (mm) : 160 x 120 x 30

8. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Power supply MODULO (wiring fig.7)

9. TECHNICAL ASSISTANCE - GUARANTEE

Problems
• The monitor doesn't light
up
• Bad image and/or bad
sound
• Image too bright
• Blue screen, no chime
• Video is not recorded when
a call is made
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69
Last version of the dowloadable manual in color on :
GB7
Possible Causes
• No power is reaching
the monitor
• Environment
• Installation or interfer-
ence
• Position of the video

camera

• Installation
• Settings
• SD card
€
www.cfi-extel.com
CFI EXTEL MEMO 2 - 03/2013
Remedies
• Check that the adaptor plug is correctly pushed
home.
• Check that the wires used are the correct size
and that the connection wires of the videophone
are not in the same sheath as the 230V.
• We recommend that you check that your
equipment is working properly by carrying out a
short-distance test (min 2 m, max 5 m cable)
• Do not point the video camera directly at the
sun or at reflecting surfaces.
• The wires connecting the monitor and the
street unit (1 and 2) have been swapped.
• Check the recording mode chap 6d
• Check that the SD card has been inserted