Technical Specifications; Monitor; Power Supply; Camera - Extel LENA 11.2 HD-2427 Guide D'installation Et D'utilisation

7. TECHNICAL SPECIFICATIONS

a. Monitor
(MN LENA 11.2)
• Reference : 811211
• Power supply : 17 V
• Consumption : 11 W
• Screen : 4" - 11 cm
• Resolution : 320x240 dots
• Measurements (mm): 128x200x22
b. Power supply
• Adaptor : 100-240 V~, 50/60Hz ; 17 V , 1.5A
If the power supply cable has to be cut, ensure that the colour coding of the wires is
maintained when reconnecting (fig. 7)
c. Camera
(PL LENA 11.2)
• Reference : 821211
• C-MOS colour video camera
• Viewing angle: H64° V48°
• Operating temperature (approximate): from -10°C to + 45°C
• Luminous sensitivity : Approx. 0,5 Lux (on night, use an additional lighting)

8. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Power supply MODULO (wiring fig.7)
• WE 8111 BIS
SER.R4

9. TECHNICAL ASSISTANCE - GUARANTEE

Problems
• The monitor doesn't light up
• Poor image and/or sound
• Image too bright
GB5
.
Possible Causes
• No power is reaching the

monitor

• Installation location
• Position of the video camera
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69
Last version of the dowloadable manual in color on :
CFI EXTEL LENA 11.2 - 11/2012 - V1
Remedies
• Check that the adaptor plug is correctly
pushed home.
• Check that the cables used are the correct
thickness and that the videophone connec-
tion cables are not in the same cable sheath
as 230 V cables.
• Do not point the video camera directly
at the sun or at reflecting surfaces.
€
www.cfi-extel.com