Assembly Instructions With Exploded Diagrams; Training Instructions - Christopeit Sport Mini Bike MB1 Notice De Montage Et D'utilisation

Assembly Instructions
GB
Before beginning assembly, be sure to observe our
recommendations and safety instructions.
Step 1:
Installation of footbar (25) on the main frame (1) with bolts (27).
1. Place screws (27) beside the rear part of the main
frame (1).
2. Insert the footbar (25) in the holder of the main frame (1) and adjust
so that the hole patterns of the holders and the footbar (25) are aligned.
3. Push the screws (27) through the holes and fasten the footbar (25) at
main frame (1).
Step 2:
Installation of the right pedals (18R) and the left pedals (18L) on the
pedal crank (17L+17R).
1. The pedals and pedal crank are marked „R" for right and „L" for left.
2. Screw the right pedal (18R) into the threaded hole on the right pedal
crank (17R) and tighten fi rmly.
(Note: It must be observed that the threaded part of the right pedal must
be screwed clockwise into the threaded hole of the right pedal crank.)
3. Screw the left pedal (18L) into the threaded hole on the left hand side
of the pedal crank (17L) and tighten fi rmly.
(Note: The threaded part of the left pedal must be screwed anticlockwise
into the threaded hole of the left pedal crank.)
Step 3:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at
a low resistance. Setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.

Training Instructions

Leg training: Arm training:
9