Assembly Instructions With Exploded Diagrams; Training Instructions - Christopeit Sport Mini Bike MB2 Notice De Montage Et D'utilisation

Assembly Instructions
GB
Before beginning assembly, be sure to observe our
recommendations and safety instructions.
Step 1:
Installation of footbar (3) on the main frame (1) with bolts (10).
1. Place screws (10) beside the rear part of the main
frame (1).
2. Insert the footbar (3) in the holder of the main frame (1) and adjust
so that the hole patterns of the holders and the footbar (3) are aligned.
3. Push the screws (10) through the holes and fasten the footbar (3) at
main frame(1).
Step 2:
Installation of the right pedals (35) and the left pedals (34) on the
pedal crank (15+16).
1. The pedals and pedal crank are marked „R" for right and „L" for left.
2. Screw the right pedal (35) into the threaded hole on the right pedal
crank (16) and tighten firmly.
(Note: It must be observed that the threaded part of the right pedal
must be screwed clockwise into the threaded hole of the right pedal
crank.)
3. Screw the left pedal (34) into the threaded hole on the left hand side
of the pedal crank (15) and tighten firmly.
(Note: The threaded part of the left pedal must be screwed anticlockwise
into the threaded hole of the left pedal crank.)
Step 3:
Attach the power
1. Please insert the plug of power cable (23)into the jack of wall power
(230V/50Hz).
Step 4:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at
a low resistance. Setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.

Training Instructions

Arm training:
Put the right hand on the right pedal and push with left hand the on/off
button and catch immediately the left pedal and follow the entered speed.
Leg training:
Put the middle of the feet onto the pedals and secure with the pedal strap.
Push the ON/OFF button to start exercising and follow the entered speed.
9