Burkert 8112 Mode D'emploi page 11

Moisture
LEVEL SWITCH 8112 - with relay output
1
Fig. 3: Horizontal mounting
1
Switching point
1
Fig. 4: Vertical installation (recommended installation position, especially for
adhesive products)
1
Switching point
2
Marking with screwed version on top, with flange versions directed to the
flange holes
With flange versions, the fork is directed as follows to the
flange holes.
Fig. 5: Fork position with flange versions
Use the recommended cables (see chapter "Connecting to
power supply") and tighten the cable gland.
You can give your LEVEL SWITCH 8112 additional protection
against moisture penetration by leading the connection cable
downward in front of the cable entry. Rain and condensation
2
Mounting
11