Instructions For The Installer; Installing The Appliance; Transportation, Unpacking; Cleaning - AEG A 60120 GS4 Notice D'utilisation

Instructions for the Installer

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in original packaging, in vertical
position considering the protective warning on packaging.
After each transportation the appliance must not be switched on for approx. 4
hours.
Unpack the appliance and check if there are damages on it. Report possible
damages immediately to the place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts not to move in the
appliance.
Wash the inside of the appliance using lukewarm water and mild detergent. Use
soft cloth.
After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy consumption and proper
operation of the appliance. When placing, take into consideration that it is
practical to operate the appliance between ambient temperature limits
according to the climate class that is given in the chart below and can be found
in the data label.
Class of climate
SN
N
ST
T
If the ambient temperature goes below the lower data the temperature of the
cooling compartment can go beyond the prescribed temperature.
If the ambient temperature goes beyond the upper data this means longer
operating time of the compressor, increasing temperature in the freezer or
increasing energy consumption.
Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+16 ... + 38 °C
+16 ... + 43 °C
G G B B
65