emerio VCE-108278.11 Mode D'emploi page 7

CLEAN THE DUST BARREL
1. Press the knob on the dust cup arm. Lift dust barrel up.
2. Press the knob on the lower end of dust barrel to open the dust barrel cover.
Removing & cleaning the pre-motor filter (Hepa filter), dust filter, and air outlet filter (Hepa filter)
Warning: Always unplug the unit from electrical outlet before getting out the dust barrel.
a. Pre-motor filter & dust filter
1. Press the knob on the dust cup arm. Lift dust barrel up.
2. Take out the pre-motor filter for cleaning and changing.
3. Take out the dust filter and use a soft brush to clean it. Rinse with clean water and then dry thoroughly
before replace it.
Note: please take the pre-motor filter out before rinse the dust filter.
Tips: how to detach the upper part from the reservoir
1. Find the lock icons on the side of the reservoir. The arrow is pointing at the locked one.
2. Turn the upper part anti-clockwise and the arrow will be pointing at the unlocked one; then lift.
b. Air outlet filter
1. Take out the air outlet filter for cleaning and changing.
- 6 -
pre-motor
filter
dust filter