14
Illumination Instructions
EN
Motion sensor and Knobs, Oven and Cabinet Lights
Illumination modes
Default mode
• Knob light mode Blue
• Brightness on high
• Motion Sensor is ON
• Logo light is ON
Select Knob light mode by holding down the
Release it on the desired mode.
Go back to Default mode: by holding down the
Selecting a color
When you have the knobs on the Color spectrum mode the knobs will slowly cycle through the color
•
spectrum, starting at green.
•
Quickly Press
•
Press twice again to let it continue changing colors.
Logo light ON/OFF
•
The logo and knobs lights work as a set, However you can also turn the logo light off while keeping
the knobs lights on.
•
Double click the
•
If the unit is powered OFF and ON again (main power switch), the logo light will
return to its default mode.
www.napoleon.com
Turn the Power Switch ON located on the box inside the grill cabinet.
A red and a blue LED light will turn on. Illumination settings are in Default mode.
Brightness: Press the
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Motion Sensor
•
The knob and logo lights will remain ON as long as motion is detected
within 1 meter of your grill. They will turn off after 15 minutes of inactivity.
•
While the motion sensor is ON (as indicated by the blue LED), you can turn
the oven and cabinet lights on and off with the
•
Press the
button in the box to turn the sensor OFF.
•
Now all your lights are controlled with the
•
The oven and cabinet lights will turn off after two hours.
•
If the motion sensor is OFF, the knob and logo lights will also
shut off after two hours.
Knob lights modes
• Blue
• White
• Green - color spectrum mode
Twice to stop the spectrum at any color you choose
button to turn the logo light OFF at any time. Double click
again to turn it back on.
button to change brightness
switch.
switch.
Brightness can be adjusted in these modes only
switch to toggle from blue to white to green.
button for 2 seconds.
N415-0537 JUN 11.20