Connecting The Indoor Unit (Monitor) To The Outdoor Unit (Doorbell); Connecting The Ac Adapter; Mount The Indoor Unit And Outdoor Unit; Connecting A Gate Opener (Not Included) - Byron DIC-23312 Manuel D'instructions

Instruction manual
3.3.1 Connecting the indoor unit (Monitor) to
the outdoor unit (doorbell)
To connect the terminals, you will need the following tool:
ü A small flat head screw driver.
A. On the monitor: Loosen the terminal screws. (See sticker on the
monitor for position.)
B. Insert the wires (See sticker on the monitor for position.)
C. Fasten the terminal screws.
D. On the outdoor unit (doorbell): Loosen the terminal screws. (See
sticker on the outdoor unit for position.)
E. Insert the wires. (See sticker on the outdoor unit for position.)
F. Fasten terminal screws.

3.3.2 Connecting the AC adapter

To connect the terminals, you will need the following tool:
ü A small flat head screw driver.
A. On the monitor: Loosen the terminal screws. (See sticker on
monitor for position.)
B. Insert the wires of the AC adapter with the cable shoes. (See
markings on wires for '+' or '- '.)
C. Fasten the terminal screws.
D. After wiring the outdoor unit: Plug in the AC adapter into a
compatible wall outlet.

3.3.3 Mount the indoor unit and outdoor unit

ü A suitable screwdriver for the included screws.
A. Attach the indoor unit and outdoor unit to the mounting plates.
8
B. Fasten the screw at the bottom of the outdoor unit.

3.3.4 Connecting a gate opener (not included)

To connect the gate opener, you will need the following tool:
ü A small flat head screw driver.
A. On the outdoor unit: Loosen the terminal screws. (see sticker on
the outdoor unit for position)
B. Insert the wires. (see sticker on the outdoor unit for position)
ð It is important that the + and – wires are in the correct position.
A. Fasten the terminal screws.
B. On the gate opener: (See the manual provided with your gate
opener.)

3.3.5 Connecting a door lock (not included)

It is possible to connect a lock to the outdoor unit that can be opened,
using the monitor. Door locks are sold separately. Article no: DB5005
& DB5005L
To connect the door lock, you will need the following tool:
ü A small flat head screw driver.
A. On the outdoor unit: Loosen the terminal screws. (see sticker on
the outdoor unit for position)
B. Insert the wires (any order)
C. Fasten the terminal screws.
D. On the lock: Loosen the two terminal screws. (Please check the
manual of your door lock for more details.)
E. Insert the wires (any order)